SRx1 v5.00 SmartReceiver (Long Range)
Shipping October 23rd
Works with F16V5, F16V4, F48V4, F16V3, F48 and F16V3 or F16V4 Differential Expansion Boards.
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Supports 3-wire pixels only.
Shipping October 23rd
Works with F16V5, F16V4, F48V4, F16V3, F48 and F16V3 or F16V4 Differential Expansion Boards.
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- All outputs have E-fuses. Fuses are resettable and can be controlled by controllers to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Firmware updates through data cable. All receivers on specified chain or all chains of a controller can be updated simultaneously. 30 second update.
- TVS Diode Protection on input and output RS-485 signal lines.
Note: Supports 3-wire pixels only.
You might also like
Customers who bought this product also bought:
Shipping October 23rd
Works with F16V5, F16V4, F48V4, F16V3, F48 and F16V3 or F16V4 Differential Expansion Boards.
The SRx1 v5.0 with E-fuses is a 4-String Differential (Long Range) SmartReceiver Board that has 4 ports. Compatible with F16V5, F16V4, F48V4, F16V3, F16V3, F48 or F16V3 and F16V4 Differential Expansion Boards. All outputs have E-fuses. Fuses are resettable and can be controlled by controller to allow power to pass only when needed.
- Current, voltage, fuse status, firmware version and string properties sent back to Version 5 (V5) controllers over data wire.
- E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI.
- Supports 3-wire pixels only.