F16V5 Pixel Controller - Ready to Run

F16V5 Ready to Run Pixel Controller

Completely Assembled ready to run F16V5 pixel controller. 1024 pixels per output.

Includes:

Meanwell 350W 12V or 5V Power Supply, Bud Industries Enclosure, Pigtails with labels, 3-wire Power Cable, Cat5e Cable, Cat5e Coupler and Falcon Mounting Plate. 

Product will ship with the new F16V5.

Documentation

• Specification Sheet
• Firmware and Issue Reporting

Description

Falcon F16V5 Pixel Controller

The controller receives 192 universes of E131, Artnet or DDP data and can output pixel data to 16 local strings and 4 receiver ports.

Board current specs

New Features

• 192 Universes of E131/Artnet.
• 2-Port Switch to "Daisy-Chain" controllers.
• Wireless ESP-07 Module with board mount antenna. Optional external antenna can be ordered.
• E-Fuses on all outputs, resettable, status indication on LEDS fuses as well as web UI. 
• 4-SmartReceivers Ports. Two-way communication with SRxN v5. receivers. Current, voltage and fuse status can be received from SRxN receivers.   
• Falcon Player Remote Mode. The controller can store sequences on micro SD card and play in sync with FPP master.
• Single 4-Layer Board that is 3/8” smaller in height.

Power
Board can be powered from pixel power or external power. Both inputs can be 5-13VDC.
Power output port to power switches. 
Two independent sides of power. Each one can be a different voltage. 
16 - Fused outputs for main board. 

Number of outputs
16 ports. 32 with SmartReceiver boards. (SRx1, SRx2, SRx4)
All outputs can use any of the 98304 channels this controller can receive as a start address.
Each string can be independently configured for null nodes, zigzag, forward/reverse, node type, pixel count , grouping etc...

Pixel per output
1024 pixels per output in 16 to 32 string mode.

String Types

More than 70+ pixel types supported.  

Supported Pixel Types

Receiver Outputs

Four dedicated SmartReceiver ports. Each can drive one receiver chain. Up to six receivers can be in a chain.

DMX/Renard Outputs

1 - Dedicated RS-485 outputs. RJ-45 connector

LCD Display,Push Buttons and Indicators
.96" OLED 128x64 matrix display for setup and status.
5 - Push buttons to control display. Up, Down, Right, Left and Select
Power LED indicator
Two multi purpose LEDS for status.
16 - Fuse LED Indicators

Temperature Sensors
1 - Processor temperature sensor.
2 - Additional Sensors 

Voltage sensors
The incoming pixel voltages of main board are detected and displayed in user interface. (The webpage interface and OLED displays the voltages and temperatures.)